REVE D PC Rear Spring Hard for RWD Drift (RD-010RH)

1

REVE D PC Rear Spring Hard for RWD Drift (RD-010RH)

$9.50
REVE D PC Rear Spring Hard for RWD Drift (RD-010RH)
- +
    • Availability In stock
    Description

    REVE D PC Rear Spring Hard for RWD Drift (RD-010RH)


    This is a dual progression rear spring, specialized for road surfaces with comparatively low grip such as P tiles and painted concrete!

    We did a lot of research selecting the material, steel quenching temperature and quenching time with many results to compare. Giving us a lineup of three types of rear spring (Medium, Medium Hard, Hard) that can be selected according to the vehicle weight and road surface grip.
    With the 2-way structure, the springs can be flipped up and down to instantly adjust to the circuit track conditions. (Please refer the following explanation for details)

    <Main specifications of Hard spring>
    ■ Length (natural length): 32mm
    ■ Number of turns: 9.5
    ■ Shrink tube color ID : Red

    ◆PC リア スプリング マッチング表 / PC Rear spring matching table

    <2WAY構造解説 / Introduction of 2WAY structure>
    ◆線間密着部 を上側にして使用した場合 / Contact lines UP

    線間密着部を上側にして使用した場合、スプリングの重心が高くなり、サスペンションの沈み込みを誘発します。トラクションを高め、スロットル オン時の蹴り出しを強くします。
    By raising the center of gravity of the spring, the droop of the suspension is induced and the kicking out feeling is stronger.

     

     

    ◆線間密着部 を下側にして使用した場合 / Contact lines Down

    線間密着部を下側にして使用した場合、スプリングの重心が低くなり、過度なサスペンションの動きを抑制します。安定感を向上させたい場合等にオススメです。
    By lowering the center of gravity of the spring, excessive suspension movement is suppressed and stability is increased on low grip

     

     

    ◆識別用 熱収縮チューブ / Heat shrink tube for identification

    スプリングの識別に便利な 熱収縮チューブを同梱しました。
    (※ミディアム:ブラック、ミディアムハード:イエロー、ハード:レッド)
    お好みの長さに切り取り、画像を参考にスプリングに装着し、ドライヤー等で温めて固定して下さい(※ドライヤーを使用する際は火傷等に充分ご注意下さい)
    A heat-shrinkable tube is bundled for easy identification of springs.
    (* Medium: Black, Medium Hard: Yellow, Hard: Red)
    Cut it to your desired length, attach it to the spring with reference to the image, warm it with a drier in order to fix it (※ Please be careful of burns when using a drier on high heat)

    ◆アルミ製 スプリング リテーナー 0mm がオススメ! / Aluminum Spring Retainer 0mm is the superset

    スプリング長が32mmの PCリアスプリングには 取付高さ0mmの アルミ製 スプリング リテーナー(RD-007-0 ¥980)がオススメです。
    外側のガイド部で取付ガタを抑制し、スプリング本来の性能を極限まで発揮させることが可能です。
    For PC rear springs with a spring length of 32 mm, we recommend the aluminum spring retainer (RD-007-0 ¥980) with a mounting height of 0 mm. It is possible to suppress the mounting play with the outer guide part and maximize the original performance of the spring.

    Additional Information
    SKU RD-010RH
    Manufacturer REVE D
    Price $9.50
    Meta Description REVED, REVE D, REVE-D, RC REAR SPRING P-TILE LOW GRIP
    Loading...