REVE D PC Rear Spring Medium for RWD Drift (RD-010RM)

1

REVE D PC Rear Spring Medium for RWD Drift (RD-010RM)

$9.50
REVE D PC Rear Spring Medium for RWD Drift (RD-010RM)
- +
    • Availability In stock
    Description

    REVE D PC Rear Spring Medium for RWD Drift (RD-010RM)


    This is a dual progression rear spring, specialized for road surfaces with comparatively low grip such as P tiles and painted concrete!

    We did a lot of research selecting the material, steel quenching temperature and quenching time with many results to compare.Giving us a lineup of three types of rear spring (Medium, Medium Hard, Hard) that can be selected according to the vehicle weight and road surface
    grip.With the 2-way structure, the springs can be flipped up and down to instantly adjust to the circuit track conditions.(Please refer the following explanation for details)

    <Main specifications of Medium spring>
    ■ Length (natural length): 32mm
    ■ Number of turns: 9.5
    ■ Shrink tube color ID: Black

    ◆PC Rear spring matching table

    <2WAY structure explanation/Introduction of 2WAY structure>
    ◆When using with the contact part between lines facing up / Contact lines UP

    If you use it with the line-to-line contact part on the upper side, the center of gravity of the spring will be high, which will cause the suspension to sink. Enhances traction and strengthens kick-out when the throttle is on.
    By raising the center of gravity of the spring, the droop of the suspension is induced and the kicking out feeling is stronger.

     

     

    ◆ When using with the line-to-line contact part facing down / Contact lines Down

    If the wire-to-wire contact part is used on the lower side, the center of gravity of the spring will be lowered and excessive suspension movement will be suppressed. Recommended when you want to improve stability.
    By lowering the center of gravity of the spring, excessive suspension movement is suppressed and stability is increased on low grip surfaces.

     

    ◆ Heat shrink tube for identification

    A heat-shrinkable tube is included to help identify the spring.
    (* Medium: Black, Medium Hard: Yellow, Hard: Red)
    Cut it to the desired length, attach it to the spring referring to the image, warm it with a dryer etc. and fix it (* When using a dryer, burn enough Please note) to etc.
    A Heat-Shrinkable Tube Is Bundled For Easy Identification Of Springs.
    (* Medium: Black, Medium Hard: Yellow, Hard: Red)
    Cut It to your Desired Length, Attach It to the Spring With Reference to the image, warm it with a drier in order to fix it (* Please be careful of burns when using a drier on high heat)

    ◆Aluminum spring retainer 0mm is recommended! / Aluminum Spring Retainer 0mm is the superset

    For PC rear springs with a spring length of 32 mm, we recommend the aluminum spring retainer (RD-007-0 ¥980) with a mounting height of 0 mm .
    It is possible to suppress the mounting play with the outer guide part and maximize the original performance of the spring.
    For PC rear springs with a spring length of 32 mm, we recommend the aluminum spring retainer (RD-007-0 ¥980) with a mounting height of 0 mm.It is possible to suppress the mounting play with the outer guide part and maximize the original performance of the spring.

    Additional Information
    SKU RD-010RM
    Manufacturer REVE D
    Price $9.50
    Meta Description REVED, REVE D ,REVE-D, REAR SPRING PC LOW GRIP P-TILE
    Loading...